Content
1. Safety Guidelines ............................................................................ 13
2.1 Intended use ..................................................................................... 15
2.2 Non-intended use .............................................................................. 15
2.3 Task .................................................................................................. 15
2.3.1 Function ................................................................................... 15
2.4.4 Illustrations .............................................................................. 16
2.4.5 Symbols ................................................................................... 16
3. Technical data ................................................................................. 16
4. Assembly ......................................................................................... 17
4.1.3 Work steps .............................................................................. 17
4.2.1 Safety instructions ................................................................... 17
4.2.4 Work steps .............................................................................. 18
5. Start-up ............................................................................................ 18
5.2 Initial operation .................................................................................. 18
6. Operation ......................................................................................... 19
7. Maintenance .................................................................................... 23
7.1 Inspection .......................................................................................... 23
7.2 Maintenance ..................................................................................... 23
8.3 Storing the tap ................................................................................... 23
9. Lagerung .......................................................................................... 23
10. Disposal ........................................................................................... 23
11. Accessories ..................................................................................... 23
12. Spare parts ...................................................................................... 23
Honeywell GmbH
GB
1. Safety Guidelines
1.1 Safety instructions in this manual
Danger
Places with this sign signify that death, severe bodily injury or significant
property damage will occur if the appropriate precautionary measures
are not followed!
Warning
Places with this sign signify that death, severe bodily injury or significant
property damage may occur if the appropriate precautionary measures
are not followed!
Caution
Places with this sign signify that small bodily injury or slight property
damage may occur if the appropriate precautionary measures are not
followed!
Places with this sign provide technical information and tips on usage
that damage to the machine must be avoided.This symbol is not a
safety indication.
Places with this sign provide information about possible hazards to the
environment
Please notice that a safety symbol never can replace the text of the
safety instruction itself - the text of the safety instruction must be read
entirely!
1.2 General safety instructions
This manual contains basic instructions which are to be observed in trans-
port, assembly, start-up, operation, maintenance, shut-down, storage and
waste disposal.
The following safety instructions are to be observed when operating the tap:
• When using the tap, the data, operation and usage conditions specifically
authorised in the technical specifications sheet and the operating manual
are to be observed.
• Prior to assembly and start-up, the operating manual of the operator and
of the specialist personnel/operating company in charge are to be read
and must be permanently accessible on site of the tap or the system.
• Installation and maintenance work may only be performed by authorised
specialist personnel with the appropriate tools.
• The technical state of the tap is to be checked at regular intervals (at least
once a year) by the operating company.
• The local safety and accident regulations are to be observed when opera-
ting the tap.
• The general technical rules must be observed when planning the usage
and operating the device.
• Any modification of the tap is prohibited and leads to the loss of all
warranty claims.
• After an interruption of the electrical or fluid supply, a defined or controlled
re-run of the process must be ensured.
13
MU1H-1551GE23 R0911