VOLTCRAFT LSG-3 Bedienungsanleitung Seite 26

To maintain this status and ensure safe operation, the user must
observe the safety instructions and warnings ("Caution!" and
"Note!") contained in these instructions for use. The following sym-
bols and notices must be observed:
Note! Read the instructions for use.
This product has been CE-tested and meets the neces-
sary guidelines.
This symbol indicates useful information for the user..
Measuring instruments and accessories should be kept out of the
reach of children!
In commercial institutions, the accident prevention regulations of
the Employer's Liability Insurance Association for Electrical Sys-
tems and Operating Materials are to be observed..
In schools, training centres, computer and self-help workshops,
handling of measuring devices must be supervised by trained per-
sonnel in a responsible manner.
For safety and licensing (CE) reasons, unauthorised conversion
and/or modifications to the product are not permitted.
Do not expose the device to high temperatures, dampness or
strong vibration or excessive mechanical loads.
Cables may only be tested with the cable detector
up to 48V DC or 24V AC. Make sure of the voltage
limits before every measurement (danger to life).
25