Safety Regulations - Quicke Q 330 Betriebsanleitung

SAFETY REGULATIONS

This symbol indicates an important safety
regulation.
Faulty use of the equipment could cause serious
damages on man and property - therefore please
observe the following:
- Carefully learn the function of operating controls,
attachment of implements etc. before starting to use the
loader. It is also your duty to instruct other persons who
are allowed to use the loader.
Safety Block: The control device is equipped with a
catch, see illus.16, page 211, which, in locking position
(left), prevents involuntary operating.
- The tractor shall be equipped with sufficient counter-
weight to ensure the stability of the tractor.
Please get in touch with your dealer !
- Always check, when changing implements, that the
implement is properly locked in position by pushing the
front part of the implement against the ground.
- Loaded implements shall be transported as low as
possible.
- Do not transport round bales or other material with
implements, not aimed for this purpose. In lifted position
the load could tip backwards over the driver.
The tractor shall be equipped with a rollover protective
structure (ROPS) and a falling-object protective
structure (FOPS).
- It is forbidden to stay under lifted loader except when
it is blocked with a mechanical stop device*. Unintentio-
nal touch of control device or leakage in the hydraulic
system might cause sudden movement.
* delivery to certain markets only.
ENGLISH (105:01)
- Lifting and transportation of people is forbidden.
- Use caution when driving with loader in lifted
position under electric cables - DANGER ! !
- Always check that no people stay in the working area.
- See to it that necessary electric- and warning signs,
according to law, function when driving on public high-
ways.
- Turn off the tractor and reduce the oil pressure with the
aid of the control valve before disassembling couplings
or taking other measures in the hydraulic system - During
high pressure oil could cause serious damages.
- Never leave the loader in lifted position.
- If an oil leakage is discovered at couplings, or due to a
damaged hose, this must immediately be dealt with.
- Mount stop device*, acc. to illus. 15, before carrying out
service works with lifted loader beam.
- Check and secure all screws regularly if necessary. This
is particularly important when it comes to the bolts fixing
the subframes to the tractor body.
- When parking the loader, an implement (a bucket, a fork
etc.) shall be attached. Also see to it that the ground is
reasonably firm and plane.
15
105