Using Pc Camera - AIPTEK pocket dv ahd h125 Bedienungsanleitung

1. Turn on your HDTV.
2. Connect the HDMI-in connector (the bigger end) of the HDMI cable to the HDTV.
3. Turn on the camcorder.
4. Connect the other end of the HDMI cable to your camcorder.
5. Switch the HDTV to the "HDMI input" mode.
Copying files to your computer
Please notice that the video clips are recorded in MP4 format. To view these videos on your PC,
you may need to install some special programs. For first time use, please install the software on
the bundled CD.
1. Turn on the camcorder.
2. Connect the camcorder to your computer by the USB cable.
The default is set to "Disk" mode. When connected to a PC, the camcorder will
automatically enter Disk (Removable disk) mode.
If you would like to change the setting, please refer to the "Advanced settings"
section for more information.
Using your camcorder as a webcam

Using PC Camera

Installing the software
The PC Camera driver is included in the accessory CD, and therefore you should install the driver
before using PC Camera.
Starting the application
1. Connect the camcorder to your computer.
Turn on your computer, then connect the accessory USB cable to the USB port of your computer.
Make sure the connector and the port are correctly aligned.
2. Switch to Camera mode.
Connect the other end of the USB cable to your camcorder. Power on the camcorder, and the
following items will appear on the screen:
1): PC Cam
2): Disk (removable disk)
Select [PC Cam] and press the OK button to confirm.
3. Launch PC Camera.
After the camcorder is correctly connected to and detected by your PC, you are ready to launch
your favorite software (such as MSN Messenger or Yahoo Messenger) to use PC Camera
functions.