Accounts Configuration - Telefunken DPF 9332 Gebrauchsanweisung

1.2 If you are using static IP connection
- Select Static IP Address in the Wi-Fi Setup menu.
- The Choose AP screen appears.
- Use the keyboard to enter your IP address, Subnet Mask, Gateway and DNS Server settings.
- When finished, select Done and then press ENTER.
- Once the connection is established, the icon
screen. The IP address, Gateway, DNS server and MAC address will be shown at the bottom
of the screen.
- When you have set up Wi-Fi
the settings you have entered in the Choose AP page. However, every time the photo frame
is powered on, you need to select Done in the Choose AP page and press ENTER
repeatedly to manually connect to the Wi-Fi network.
Tips: On-screen keyboard use
- Press the ◄/►/▲/▼ to select an item, press ENTER to confirm.
- Select NEXT and press ENTER to move the cursor forwards.
- Select Prev and press ENTER to move the cursor backwards.
- To go to the next field or move among fields, select Done and then press ENTER.
- Select and press ENTER to cancel your last input.
1.3 Wi-Fi connection status
- Return to the Wi-Fi setup submenu and select Wi-Fi check.
- Press ENTER to display the check menu, connection errors and connection will be shown.
- Re-connect to access point or reset the Wi-Fi setup if an error occurs.

2. Accounts Configuration

2.1 Configuring your Picasa™ account
Note: Before making the following configurations, you need to sign up for a Picasa™ account
on the Internet first if you don't have an existing account. Go to www.picasa.google.com
- Press EXIT on your remote as many times as necessary for the media selection screen to
come up.
- Press ◄/► to select Wi-Fi and press ENTER.
- Press ► to highlight Account Cfg and press ENTER to enter the submenu.
- Press ▼ to highlight Picasa and press ENTER to enter.
- In the Keyboard screen that appears, enter your account in the Account field.
- Use the ◄/►/▲/▼ to select Done, then press ENTER to move to the next field.
- Enter your password in the Password field.
- Use the ◄/►/▲/▼ to select Done, then press ENTER to complete.
- Now you will be able to use Picasa in the Wi-Fi List.
Non contractual document subject to change in case of typographical errors (Mktg0810)
The manufacturer reserves the right to modify the product specifications without notice.
will be flashing in the top right corner of the
®
connection using Static IP Address, the photo frame will save
COPYRIGHT SOPEG 2010
9