Philips dtr 300 tnt Benutzerhandbuch Seite 95

DTR 300 sans esp_140205.qxd
- Plug your aerial lead plug into the "AERIAL IN" socket of your digital receiver.
- Connect the "RF OUT" socket of your digital receiver to the "ANT IN" socket of your VCR by
means of the RF coaxial lead supplied with your digital receiver.
- Connect the "ANT OUT" socket of your VCR to the aerial input socket of your TV by means of a
RF coaxial lead.
- Connect the "TV" SCART socket of your digital receiver to the "EXT1" SCART socket of your TV
by means of the SCART lead supplied with your digital receiver.
- Connect the "VCR" SCART socket of your digital receiver to the "EXT1" SCART socket of your
VCR by means of a SCART lead. Alternatively, if your VCR supports the Easy Record feature,
connect the "VCR" SCART socket of your digital receiver to the "EXT2" SCART socket of your
VCR as shown on the second diagram.
- Plug all your equipment, excluding your digital receiver, into the mains.
- Switch on your TV and select a channel.
- Plug your digital receiver into the mains.Your digital receiver will display the WELCOME screen
(the green LED will be illuminated).
- Read on chapter 5 to proceed with the channel scan of your digital receiver.
Note:
1- If you have a S-Video VCR refer to paragraph 7.2.3.2 for further settings and consult the user manual of
your VCR.
2- With either connection set up you can:
- Watch digital TV while you record analogue TV.
- Watch analogue TV while you record digital TV.
- Record the digital TV channel you are watching.
- Watch Play Back from your VCR.
3- With the second connection set up, you can use the Easy Record feature provided your VCR supports it.
14/02/05
Terrestrial Receiver
RF Cable
TV set
PHILIPS PHILIPS
EXT 2 EXT 1
For optimum configuration
CONNECTING YOUR DIGITAL RECEIVER 13
16:16 Page 13
VCR/DVD
EXT 1
EXT 2
to AC outlet
ANT IN
ANT OUT