Information; Timers - Philips dtr 300 tnt Benutzerhandbuch

DTR 300 sans esp_140205.qxd
28 CHANGE THE SETTINGS OF YOUR RECEIVER
14/02/05 16:16 Page 28
- Press <OK>.You are then prompted to enter your master
PIN code.
- Enter the master PIN code. For more information on the
master PIN code, refer to the troubleshooting guide.
Note: when restoring the factory settings, you lose all your
personal settings.
7.4

Information

i
- Press the button to access the System software sub-
menu.
System software
This item is used to manage software updates, which are
necessary to keep your receiver up-to-date with the
developments in digital television and make new features
available. Updates are part of normal transmissions.
Your receiver is originally set up to automatically accept
software updates (recommended). If you want to be
prompted each time new software is available, follow the
instructions below.
i
- Press the button to access the System software
settings.
The current hardware/software version is displayed, and the
selection is on Always accept new software.
- Move the Puck to No if you want to be prompted when
new software is available.
- Press <OK> to confirm.
u
- Press to exit the screen and return to the System
software item, or press the blue colour button to exit the
menu.
Note: to carry out the update when new software is available,
simply follow the on-screen instructions.
7.5

Timers