Philips dtr 300 tnt Benutzerhandbuch Seite 119

DTR 300 sans esp_140205.qxd
Problem
You cannot select all of the
channels and the P+/- or Arrow
up/down buttons do not always
work.
You cannot access a particular
channel, even using the number
buttons.
You have forgotten your PIN code.
I set the timer but it did not
record what I wanted.
The order of my channels has
changed.
The on-screen displays are not as
sharp as expected.
The picture on some channels
seems to have been stretched or
squashed.
14/02/05 16:16 Page 37
Possible cause
Some channels have been selected
as favourites and the favourites
mode is on.
The parental lock has been
activated on this channel and an
OSD message prompts you for
your PIN code.
The video was set incorrectly.
They have been re-arranged as
described in paragraph 7.3.1.1.
If you have connected using SCART
and you have an RGB-capable TV,
one of the receiver settings could
be wrong.
You have connected the receiver
TV SCART to a SCART socket of
your TV set which is not RGB-
capable
The broadcast is probably in
widescreen and the receiver
settings may not be correct.
Action
Use the <FAV> button to select
another Favourite list. Use the All
TV Channel list to see all available
TV channels.
Enter your parental code to access
the channel or unlock the channel.
See paragraph 7.7 for more details.
When prompted for your PIN
code, enter the Master PIN code.
This will allow you to proceed as
well as reset the PIN code to the
default PIN code of the receiver
(default is 1234).
The Master PIN Code is 0711.
Note: Keep this code secret to
prevent your children from using it.
Make sure that your video is set
for the same time as your digital
receiver.
Alternatively use one of the Easy
Record options to control
automatically your VCR (see
paragraph 9.2)
Refer to this section to change the
order again.
Refer to paragraph 7.2.3.1 and
modify the "Video Output" setting
to RGB.
Check if the TV SCART socket of
the TV is RGB-capable. If not refer
to the user manual of your TV to
change the SCART connection to
your TV.
Check the receiver "Screen
format" option setting, following
the information in paragraph
7.2.3.1. If you have a widescreen
TV, you may also need to check the
settings on your TV.
TROUBLESHOOTING GUIDE 37