Connecting Your Digital Receiver - Philips dtr 300 tnt Benutzerhandbuch

DTR 300 sans esp_140205.qxd
4

Connecting your digital receiver

There are several ways you can connect and incorporate your digital receiver into your existing
audio / video equipment set up.
Warning!
Before starting to connect:
- Unplug all equipment (TV set,VCR and/or DVD, etc.) from the mains.
- Do not connect your digital receiver to mains supply now.
- Check your current wiring: you may not need to modify your existing Audio / Video set up
connections if they already match the connection diagrams below.
- Depending on your exiting set up, choose the best suited connection method for incorporating
your digital receiver into your existing Audio / Video set up. Please read chapters 4.1 and 4.2.
Note: when adding new equipment, be sure to refer to the related installation instructions of the relevant
manual.
4.1 Connecting to a TV and a VCR both fitted with one SCART
socket
Incorporate your receiver in your existing installation as shown on the diagrams or follow the
instructions below.
12 CONNECTING YOUR DIGITAL RECEIVER
14/02/05
Terrestrial Receiver
RF Cable
TV set
PHILIPS PHILIPS
EXT 2 EXT 1
16:16 Page 12
to AC outlet
VCR/DVD
EXT 1
EXT 2
ANT IN
ANT OUT