Contact Samsung - Samsung BD-C8900 Bedienungsanleitung

You can also update software as follows: Software
update is the same as in the By Internet menu.
By USB : Insert a USB drive containing the
•
firmware upgrade folder, downloaded from
"www.samsung.com/bluraysupport".
Connect the USB flash drive to the USB port of
the product to update the software, then follow
the on-screen instructions.
Please be careful not to disconnect the power
or remove the USB drive until upgrades are
complete.
The BD-HDD combo will be turned off and on
automatically after completing the firmware
upgrade. "UPDATE" will appear on the front
display.
The BD-HDD combo will be turned off and
on automatically after completing the loader
upgrade. The broadcasting channel will be
displayed.
By Disc : Visit www.samsung.com/
•
bluraysupport, download and write the latest
software onto a disc.
Burn a data disc with your CD burning software.
After disc is finalized insert it in the BD-HDD
combo.
Please be careful not to disconnect the power
until upgrades are complete.
The BD-HDD combo will be turned off and on
automatically after completing the firmware
upgrade. "UPDATE" will appear on the front
display.
The BD-HDD combo will be turned off and
on automatically after completing the loader
upgrade. The broadcasting channel will be
displayed.
Alternative Software (backup) : Displays
•
the Software version downloaded through By
Internet. During the Software upgrading, When
the Upgrade will discontinue from last step, this
function be activated.
NOTE
✎
▪
When the system upgrade is done, check the
software details in the software Upgrade menu.
▪
Do not turn off the product during the System
Upgrade, as it may cause the product to not work
properly.
▪
Software upgrades using the USB Host jack must be
performed with a USB memory flash stick only.

Contact Samsung

Provide contact information for assistance with
your product.

English