Setup
Dynamic Range Control
You can listen at low volumes but still hear dialog
clearly.
This is only active when a Dolby Digital signal is
detected.
Auto : The Dynamic Range Control will be set
•
automatically based on the information provided
by the Dolby TrueHD Soundtrack.
Off : Turn Dynamic Range Control off.
•
On : Choose to listen to a movie at a lower
•
volume without losing clarity of dialog.
Downmixing Mode
Set whether to downmix the multi-channel audio
into fewer channels.
Normal Stereo : Downmixes the multi-channel
•
audio into two channel stereo. Choose when
connected to equipment that does not support
virtual surround functions such as Dolby Pro
Logic.
Surround Compatible : Downmixes multi-
•
channel audio into surround compatible stereo.
Choose when connected to equipment that
supports virtual surround functions such as
Dolby Pro Logic.
DTS Neo:6
You can enjoy multi-channel sound from a simple
2-channel audio source.
Off : Outputs a 2-channel audio signal through
•
the front speakers only.
Cinema : Select this if you want to play
•
2-channel movie sound over multi-channels.
Music : Select this if you want to play 2-channel
•
music sound over multi-channels.
NOTE
✎
▪
If you are using HDMI receiver, this option is
available when you set Digital Output setup as PCM.
Audio Description
You can add a verbal description to the main
audio to help the visually impaired.
On : Turns the Audio Description function on.
•
Off : Turns the Audio Description function off.
•
NOTE
✎
▪
If you select on, you can adjust volume.
English
System
Plug & Play
By using Plug & Play, you can set country,
clock mode, TV aspect and Network Settings, etc.
For more information on the settings, refer to the
corresponding section in this user manual.
(See page 29~47)
NOTE
✎
▪
If you want to change plug & play options, you
should enter the password.
Internet@TV Screen Size
Set the Internet@TV Screen to the optimal size.
Size 1 : Display smaller application icons, you
•
may see some black on all sides of screen.
Size 2 : Display normal application icons.
•
Size 3 : Display larger application icons, image
•
may be too large for your TV screen.
Anynet+(HDMI-CEC)
Anynet+ is a convenient function that offers linked
operations with other Samsung products with the
Anynet+ feature.
To operate this function, connect this product to a
Samsung TV with an HDMI cable.
You can operate this product using a Samsung
TV remote control and start disc playback simply
by pressing the PLAY (
remote control.
For more information, please see the TV user
manual.
On : Anynet+ functions will work.
•
Off : Anynet+ functions will not work.
•
NOTE
✎
▪
This function is not available if the HDMI cable does
not support CEC.
▪
If your Samsung TV has an n logo, then it
supports the Anynet+ function.
▪
Depending on your TV, certain HDMI output
resolutions may not work.
Please refer to the user manual of your TV.
) button on the TV's