Divx(R) Deactivation; Network; Network Settings; Wired Network - Samsung BD-C5900 Bedienungsanleitung

DivX(R) Deactivation

Select this to get a new registration code.
Settings
Display
Audio
System

Network

Do you want to deactivate your device?
Language
Security
General
Support
NOTE
▪
This function can be operated when DivX(R)
Registration function is deactivated.
To begin setting up the network connection for
your product, follow these steps:
1.
In the Home menu, press the ◄► buttons
to select the Settings, and then press the
ENTER button.
2. Press the ▲▼ buttons to select Network, and
then press the ENTER button.
3. Press the ▲▼ buttons to select Network
Settings, and then press the ENTER button.
4. Press the ▲▼ buttons to select Network
Type, and then press the ENTER button.
5. Press the ▲▼ buttons to select Wired or
Wireless, and then press the ENTER button.
6.
Go to the next section.

Network Settings

Please contact your ISP to find out if your IP
address is static or dynamic. If it is dynamic, we
recommend using the Auto setting. This is the
easiest and will work in the majority of cases. If it is
static, you must use the manual set up procedure.
Directions for wired networks are below. Directions
for wireless networks are after the directions for
wired networks.
01963E-BD-C5900-XEN-ENG.indb 37
Initial Settings
Yes No
Network

Wired Network

1.
In the Network Settings menu, press the ▲▼
buttons to select Network Setting, and then
press the ENTER button.
The Internet Protocol Setup screen appears.
2. Press the ► button, then select Auto or
Manual, and then press the ENTER button.
Setting Up a Wired Connection - Auto
1. If you selected Auto, the Network Function
acquires and fills in the values for IP Address,
Subnet Mask, etc., automatically.
NOTE
▪ This process can take up to five minutes.
Settings
Network Setting
Display
Internet Protocol Setup : Auto
Audio
IP Address : 0
System
Subnet Mask : 0
Network
Gateway : 0
Language
DNS : Auto
Security
DNS Server : 0
General
Support
> Move " Select
2.
After the Network Function has acquired the
network values, press the RETURN button.
Then, run a Network Test to ensure the product
has connected to your network (See page 40).
3.
If the Network Function does not acquire the
network values or you selected Manual, go to
the directions for Manual Setup.
\
0 0 0
0 0 0
0 0 0
0 0 0
' Return

English
2010-11-05 오후 2:28:11