Divx(R) Registration; Network; Network Settings; Network Status - Samsung BD-D5100 Benutzerhandbuch

• Time Zone : You can specify the time zone
that is applicable to your area.
• DST : You can set DST (Daylight Saving
Time) on or off.

DivX(R) Registration

View DivX(R) VOD Registration Code to
purchase and play DivX(R) VOD content.
✎ NOTE
▪ This option is not activated if you select OK.
To activate this option, please activate the
DivX(R) Deactivation.
DivX(R) Deactivation
Select this to get a new registration code.
NOTE
✎
▪ You can operate this function when the DivX(R)
Registration function is deactivated.

Network

To begin setting up the network connection
for your player, follow these steps:
1. In the Home menu, press the ◄► buttons
to select the Settings, and then press the
ENTER button.
2. Press the ▲▼ buttons to select Network,
and then press the ENTER button.
3. Press the ▲▼ buttons to select Network
Settings, and then press the ENTER
button.
4. Press the ▲▼ buttons to select Network
Type, and then press the ENTER button.
5. Select Wired, and then press the ENTER
button.
6. Go to the next section.
16

Network Settings

Please contact your ISP to find out if your IP
address is static or dynamic. If it is dynamic,
we recommend using the Auto setting. This
is the easiest and will work in the majority of
cases. If it is static, you must use the manual
set up procedure.
Directions for wired networks are below
Wired Network
1. In the Network Settings menu, press the
▲▼ buttons to select Network Setting,
and then press the ENTER button.
The Internet Protocol Setup screen
appears, and then press the ENTER
button.
2. Press the ▲▼ button, then select Auto or
Manual, and then press the ENTER button.
Setting Up a Wired Connection - Auto
1. If you selected Auto, the Network
Function acquires and fills in the values
for IP Address, Subnet Mask, etc.,
automatically.
NOTE
✎
▪ This process can take up to five minutes.
Settings
Network Setting
Display
Internet Protocol Setup : Auto
Audio \
IP Address : 0 0 0 0
System
Subnet Mask : 0 0 0 0
Network
Gateway : 0
0 0 0
Language
DNS : Auto
Security
DNS Server : 0 0 0 0
General
Support
> Move " Select ' Return
2. After the Network Function has acquired
the network values, press the RETURN
button. Then, run a Network Test to ensure
the player has connected to your network.
3. If the Network Function does not acquire
the network values or you selected Manual,
go to the directions for Manual Setup.
Setting Up a Wired Connection - Manual
.
If the Auto Setting does not work, you'll need
to set the Network Setting values manually.
To get the Network setting values through
most Windows computers, follow these
steps:
1. Right click the Network icon on the bottom
right of the screen.
2. In the pop-up menu, click Status.
3. On the dialog that appears, click the
Support tab.
4. On the Support tab, click the Details
button.
The Network settings are displayed.
To enter the Network settings into your player,
follow these steps:
1. On the Internet Protocol Setup screen,
press the ENTER button.
2. Press the ▲▼ buttons to select Manual,
and then press the ENTER button.
3. Press the ▼ button to go to the first entry
field (IP Address).
4. Use the number buttons on your remote
to enter numbers.
5. When done with each field, use the ►
button to move successively to the next
field.
You can also use the other arrow buttons
to move up, down, and back.
6. Enter the IP Address, Subnet Mask,
and Gateway values.
7. Press the ▼ button to go to DNS.
8. Press the ▼ button to go to the first DNS
entry field. Enter the numbers as above.
9. Press the RETURN button on your
remote.
10. Run a Network Test to ensure the player
has connected to your network.
Network Test
Use this menu to connect to the wired
network or check whether your network
connection is working or not.

Network Status

Check whether a connection to the network
and the Internet have been established.

BD-LIVE Internet Connection

Set to allow or prohibit an Internet connection
when you use the BD-LIVE service.
• Allow (All) : The Internet connection is
allowed for all BD-LIVE contents.
• Allow (Valid Only) : The Internet
connection is allowed only for BD-LIVE
contents containing a valid certificate.
• Prohibit : No Internet connection is allowed
for any BD-LIVE content.
NOTE
✎
▪ What is a valid certificate?
When the player uses BD-LIVE to send the disc data
and a request to the server to certify the disc, the
server uses the transmitted data to check if the disc
is valid and sends the certificate back to the player.
▪ The Internet connection may be restricted while
you are using BD-LIVE contents.