Setting The Alarm Clock - Silvercrest SWE 100 B1 - IAN 78726 Bedienungsanleitung

Multi-Band Tuner SWE 100 B1

Setting the Alarm Clock

Make sure that the clock has been set correctly (see the page 100 -
Setting the Time). The alarm time can only be set while the device is
powered off. If it is still powered on, press the On/Off button [8] to power
the device off.
 Press and hold the AL.SET button [14]. The indication "ALARM" [30]
starts blinking on the display.
 Then press the HOUR button [13] repeatedly to set the hours of the
alarm time. You can also keep the HOUR button [13] pressed down to
accelerate the digit adjustment. To distinguish ante meridian (morning)
and post meridian (afternoon) time for the 12-hour display, "PM" [27]
will display for post meridian clock hours.
 Keep the AL.SET button [14] pressed. Then press the MIN button [12]
repeatedly to set the minutes of the alarm time. You can also keep the
MIN button [12] pressed down to accelerate the digit adjustment.
 Release the AL.SET button [14] after the alarm clock has been set
correctly.
102 - English