Connections; Connecting The Am And Fm Antennas - Yamaha tx-497 Bedienungsanleitung

CONNECTIONS

CAUTION
Do not connect this unit or other components to the mains power until all connections are complete.

Connecting the AM and FM antennas

Both AM and FM indoor antennas are included with this unit. In general, these antennas should provide sufficient signal
strength. Connect each antenna correctly to the designated terminals.
Outdoor FM antenna
Antenna adapter Antenna adapter
(included for U.S.A. and (included for U.S.A. and
Canada models only) Canada models only)
75-ohm 75-ohm
coaxial cable coaxial cable
Commercially available
antenna adapter
75-ohm
coaxial cable
6
CONNECTIONS
Indoor FM antenna
(included)
FM ANT GND
75Ω UNBAL
300-ohm
feeder cable
Commercially available
300-ohm/75-ohm antenna adapter
Outdoor AM antenna
Use a 5 to 10 m of vinyl-
covered wire extended
outdoors from a window.
AM ANT
AM loop antenna
(included)
Ground (GND terminal)
For maximum safety and
minimum interference, connect
the antenna GND terminal to a
good earth ground. A good earth
ground is a metal stake driven into
moist earth.