Controls And Their Functions; Front Panel - Yamaha TX-492 Bedienungsanleitung

CONTROLS AND THEIR FUNCTIONS

FRONT PANEL

1
NATURAL SOUND AM/FM STEREO TUNER
POWER
* Parts in shaded area ( ) are present on
TX-492RDS only.
1
POWER switch
Press this switch to switch the power on. Press it again to
switch the power off.
2
Display panel
Shows station frequencies and various information. (Refer to
the next page for details.)
3
Remote control sensor
Receives signals from a remote control transmitter provided
with a YAMAHA amplifier or receiver.
4
PRESET STATIONS buttons
Select a preset station number (1 to 8).
5
TUNING DOWN and UP buttons
Used for tuning. Press the "UP" button to tune in to higher
frequencies, and press the "DOWN" button to tune in to lower
frequencies.
TX-492RDS only
PTY SELECTOR buttons
When this unit is in the PTY SEEK mode, pressing these
buttons changes the currently selected program type.
6
RDS MODE/FREQ button
When an RDS station is received, pressing this button changes
the display mode into the PS mode, PTY mode, RT mode
and/or CT mode (if the station employs those RDS data
services), and frequency display in turn.
7
PTY SEEK MODE button
When this button is pressed, the unit turns into the PTY SEEK
mode.
8
PTY SEEK START button
Press this button to begin searching for a station after the
desired program type is selected in the PTY SEEK mode.
2
TX-492RDS only
TX-492RDS only
TX-492RDS only
3
PRESET STATIONS
1
5
RDG MODE/FREQ PTY SEEK EON A/B/C/D/E MEMORY
MODE START MAN'L/AUTO FM
6 7 8 9 0 A B
9
TX-492RDS only
EON button
Press this button to select a desired program type (NEWS,
INFO, AFFAIRS, SPORT) when you want to call a radio
program of that program type automatically.
0
A/B/C/D/E button
Press this button to select a desired group (A–E) of preset
stations.
A
MEMORY (MAN'L/AUTO FM) button
When this button is pressed, the MEMO indicator flashes for
about 5 seconds. During this period, press the desired
PRESET STATIONS button to enter the displayed station into
the memory.
When this button is pressed and held for about 3 seconds, the
automatic preset tuning begins. (Refer to page 11 for details.)
B
EDIT button
This button is used to exchange the places of two preset
stations with each other.
C
FM/MW/LW button
Press this button to switch the reception band to FM, MW or
LW.
TX-492
FM/AM button
Press this button to switch the reception band to FM or AM.
D
TUNING MODE (AUTO/MAN'L MONO) button
Press this button to switch the tuning mode to automatic or
manual. To select the automatic tuning mode, press this
button so that "AUTO" lights up on the display. To select the
manual tuning mode, press this button so that "AUTO" goes
off.
4 5
2 3 4 TUNING
DOWN
6 7 8
PTY SELECTOR
EDIT TUNING MODE
AUTO/MAN'MONO
TX-492RDS TX-492
FM/MW/LW FM/AM
C C
TX-492RDS
UP
D
7