Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Set-up
Insert a full unbound document into Paper Scale.
TIPS: There may be a different size of 3:1 or 2:1 on some wire
diameters than the standard, please make sure your on-hand
wire is adapted before punching 3:1 or 2:1.
Punching
TIPS: Maximum single punching:
20 sheets of 20lbs / 70-80g/m paper.
Comfortable single punching:
12-15 sheets of 20lbs / 70-80g/m paper.
Punch inner sheets and cover separately as side margin
may vary.
Re-Align (Centre) margins for oversize covers.
1
3
Read the Selector to determine the correct:
1
• Pitch (3:1 or 2:1)
• Depth Margin
• Wire Size
• Wire Closure
Set Depth Control to the colour determined depth margin. Colour
2
indicated on Depth Control should match colour on Selector.
3
Set Wire Closer Control to the determined wire closure size.
Read the determined wire size and set aside.
4
1
3a
1
Move Side Margin Control to proper sheet and cover size.
Note: There are different side margins for 11" sheets and their
11
1
⁄
" Covers.
4
2
Pull out disengagement pins for partially covered holes.
3
Insert sheets and pull handle forward to punch.
2
4
2
3b
5
Werbung
Inhaltsverzeichnis
