Audiosonic CD-1576 Bedienungsanleitung Seite 3

Compact Disc
COMPACT DISC
1. Always use a compact discs bearing the mark as shown:
2. Noted on handling discs
Removing the disc from its storage case and loading it.
* Do not touch the reflective recorded surface.
* Do not stick paper or write anything on the surface.
* Do not bend the disc.
3. Storage
* Store the disc in its case.
* Do not expose discs to direct sunlight or high temperatures, high humidity or dusty places.
4. Cleaning a disc
* Should the disc become soiled, wipe off dust, dirt and fingerprints with a soft cloth.
* The disc should be cleaned from the centre to the edge.
* Never use benzene, thinners, record cleaner fluid or anti static spray.
* Be sure to close the CD door so the lens is not contaminated by dust.
* Do not touch the lens.
UK-4
Power Supply
Using the DC power supply
The mains power supply can be used to save the batteries. Make sure that the unit is NOT plugged into the
wall outlet before inserting the batteries.
Batteries (not included)
Open the battery compartment and insert 8 R14 batteries carefully observing the "+" and "-" polarity
marking inside the compartment.
Important:
When replacing the batteries, make sure you dispose of the old batteries in accordance with regulations in
your area. They should be disposed of in a location specifically designated for that purpose so they can be
recycled safely and without posing any risk for the environment. Do not burn batteries.
NOTE:
Incorrect use of the batteries may result in electrolyte leakage having a corrosive effect in the
compartment.
Do not mix different types of batteries: do not use alkaline batteries with saline batteries, for example.
Do not mix old batteries with new ones. Use batteries of the same type recommended by the manufacturer.
If the unit is not to be used for an extended period of time, remove the batteries as damage may occur due
to battery leakage.
Using the AC supply
Make sure that the voltage indicated on the manufacturer's nameplate in the battery compartment
corresponds to the voltage supply in your home. If this is not the case, DO NOT use this appliance. Seek
qualified advice.
Connect the electrical power cable to the unit, then plug it into the wall outlet. The wall outlet must be
located near the product and be easily accessible.
To turn power to the apparatus off, unplug the power supply cable from the wall outlet.
To protect the unit during thunderstorms, unplug the power supply cable from the wall outlet.
UK-5