Storing The Sound Balance Settings; Memory Back-Up; Setting The Sleep Timer - Yamaha Soavo-900SW Bedienungsanleitung

USING THIS UNIT

Storing the sound balance settings

You can store up to 3 sets of your favorite settings (volume,
high-cut, phase and B.A.S.S. setting) in this unit.
Remote control
POWER STANDBY SLEEP
1
1
B.A.S.S. PHASE
MEMORY 2
3
PRESET
1 2 3
1
1
VOLUME
HIGH CUT
■Storing the setting
In the following procedure, PRESET 1 is used as an
example.
1
Adjust the sound balance between the
volume, high cut, phase and
page 13).
2
Press .
MEMORY
The PRESET indicators on the front panel flash.
-900SW
3 1
3
Press .
PRESET 1
The PRESET 1 indicator lights up. The current setting
is stored as PRESET 1.
y
• In step 3, pressing a stored number overwrites the old
setting.
• While the VOLUME control or the H-CUT control is
rotating by pressing a PRESET, pressing another
PRESET is ineffective.
■Recalling a setting
Press PRESET you want to recall (1, 2 or 3).
14
En
Front panel
STANDBY/ON indicator
SUBWOOFER SYSTEM Soavo-900SW
1 2 3 1 2 3
STANDBY
PHASE B.A.S.S. PRESET
/ON
STANDBY
/ON
VOLUME
H-CUT
1
B.A.S.S. (see
2 3
PRESET

■Memory back-up

Even if you turn off this unit by using the POWER switch
on the rear panel, this unit recalls the last setting when the
power is turned back on (Last memory function).
Note
If the power is cut for more than one week, the setting is
cleared.

Setting the sleep timer

If you set the sleep timer, this unit automatically turns to
the standby mode after 120 minutes.
POWER STANDBY
B.A.S.S.
PRESET
1
HIGH CUT
Press SLEEP.
The color of the STANDBY/ON indicator changes to
orange.
Pressing SLEEP again cancels the sleep timer.
SLEEP
SLEEP
PHASE
MEMORY
2 3
VOLUME
SUBW
STANDBY
/ON