Connections; Connecting To The Amplifier Equipped With Subwoofer (Line Out) Terminal(S) - Yamaha Soavo-900SW Bedienungsanleitung

See pages 7 - 8 when your amplifier has subwoofer (line out) terminal(s), or see pages 9 - 11 when your amplifier has no
subwoofer (line out) terminal.
Notes
• Do not connect the power cord of this unit and other components into an AC outlet until all connections between
components are completed.
• Be sure to connect the left channel (L), right channel (R), "+" (red) and "–" (black) properly. Also, refer to the owner's
manual of your component to be connected to this unit.
• The connection methods or the names of the terminals may differ depending on the component. Refer to the owner's
manual of your component as well.

Connecting to the amplifier equipped with subwoofer (line out) terminal(s)

1
When your amplifier has a one-channel subwoofer terminal
Connect the subwoofer (or low pass etc.) terminal of your amplifier to the INPUT 3 (
using a commercially available mono pin cable.
When your amplifier has two-channel subwoofer terminals
■Using one subwoofer
Connect the "L" side subwoofer terminal of your amplifier to the INPUT 3 (
subwoofer terminal of your amplifier to the INPUT 3 (
cable.
Notes
• Some amplifiers have line output terminals labeled PRE OUT. When you connect this unit to the PRE OUT terminals
of the amplifier, make sure that the amplifier has at least two sets of PRE OUT terminals. If the amplifier has only one
set of PRE OUT terminals, do not connect this unit to the PRE OUT terminals. Instead, connect this unit to the speaker
terminals of the amplifier (see pages 9 - 10).
• When connecting to a monaural line output terminal of the amplifier, connect the INPUT 3 (
• When connecting to line output terminals of the amplifier, other speakers should not be connected to the OUTPUT
terminals on the rear panel of this unit. If connected, they will not produce sound.

CONNECTIONS

L MONO L
R R
INPUT INPUT
3 2
Subwoofer
L MONO
R
INPUT
3
Subwoofer
Amplifier
Mono pin cable (not included)
OUTPUT
TO SPEAKERS
R L
R FROM AMPLIFIER L
INPUT 1
L
/MONO) terminal of this unit and "R" side
R ) terminal of this unit using a commercially available audio pin
OUTPUT
TO SPEAKERS
L
R L
R
INPUT
2
R FROM AMPLIFIER L
INPUT 1
L
/MONO) terminal of this unit
Amplifier
L
/MONO) terminal.
Audio pin
cable
(not included)
7
En