Line In Socket (Rear (Without Illustration)) - AEG MRC 4119 Bedienungsanleitung

English
64
Delayed Shut-Off
You can use the function for delayed power-off with radio operation. The unit is switched
off automatically when the selected time is reached.
• Select the time after which the unit is switched off by repeatedly pressing the
SNOOZE/SLEEP/DIMMER button (9). The following selections can be made: 90, 60,
30, and 15 minutes. "SLEEP" will be displayed.
• This function can be cancelled with the button (8).
Projection
With this unit, you can project the time onto a wall or the ceiling.
• You can switch this function on and off with the ON/OFF / PROJECTION button (15).
• Rotate the projector (1) to the desired position.
• The rear of the projector has a setting wheel (2) with which you can adjust the sharp-
ness of the projection.
• You can use the
• Press and hold the
switch between clock time and temperature display.
NOTE:
At the set alarm time and after a power interruption the projection will start automati-
cally.

LINE IN socket (Rear (without illustration))

To connect analogue replay devices. Via this socket you can also hear the sound of other
playback devices such as MP3 players, CD players etc. through the loudspeaker.
1. Please connect the external device with a 3.5 mm stereo jack plug to the LINE IN
socket.
2. The device switches automatically to LINE IN operation. The radio sound is switched
off.
3. The speaker will output the audio of the external device. Use
adjust the volume.
4. For the remaining procedure please see the operating instructions of the external
sound source.
/ 180° FLIP button (4) to flip the projection by 180 degrees.
/ 180° FLIP button for approx. 3 seconds. By doing so you can
and buttons to