Inhaltsverzeichnis
Werbung
KC BT 25
Conformity
Model
number: KC BT 25
Description: Kitchen radio
Brand name: BLAUPUNKT
Responsible party: M3 Electronic GmbH
Gutenbergstrasse 5, D-65830 Kriftel. Germany
Hereby, Blaupunkt Competence Center Audio M3 Electronic GmbH, declares that this Class
1equipment is in compliance with the essential requirement and other relevant provisions of
Directive 1999/5/EC.
Letter of conformity can be obtained from:
Safety Instructions
1.
Read Instructions - All the safety and operating instructions must be read before the product is
operated.
2.
Retain Instructions - The safety and operating instructions should be kept with the product for
future reference.
3.
Heed warnings - All warnings on the product and in the operating instructions should be
adhered.
4.
Follow instructions - All operating and users' instructions should be followed.
5.
Installation - Install in accordance with the manufacturer's instructions.
6.
Power sources - This product should be operated only from the type of power source indicated
by the marking adjacent to the power cord entry. If you are not sure of the type of power supply
to your home, consult your product dealer or local power company.
7.
Grounding or polarization - the product is not required to be grounded. Ensure that the plug is
fully inserted into the wall outlet or extension cord receptacle to prevent blade or pin exposure.
Some versions of the product are equipped with a power cord fitted with a polarized
alternating line plug (a plug having one blade wider than the other). This plug will fit onto the
power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into
the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. When
using an extension power-supply cord or a power-supply cord other than that supplied with the
appliance, it should be fitted with the appropriate molded plugs and carry safety approval
appropriate to the country of use.
8.
Power cord protection - Power-supply cords should be routed so that they are not likely to be
walked on, kinked or pinched by items placed on or against them, paying particular attention to
cords from plugs, receptacles and the point where they exit from the product.
9.
Overloading - Do not overload wall outlets, extension cords, or multiple sockets, as this can
result in a risk of fire or electric shock.
10. Ventilation - The product must be properly ventilated. Do not place the product on a bed, sofa,
or other similar surface. Do not cover the product with any items such as tablecloths,
newspapers, etc.
11.
Heat - The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products, including amplifiers that produce heat. No naked flame sources, such
info@m3-electronic.de
19
.
Werbung
Inhaltsverzeichnis
