JGC KW-72MP3-USB Bedienungsanleitung Seite 18

RECORDING
GENERAL INFORMATION ON RECORDING
•
Recording is permissable in so far as copyright or other rights of third parties are not infringed.
•
This deck is not suitable for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. For
recording, use NORMAL (IEC I) type cassettes on which the tabs have not been broken. The best
recording level is set automatically. Altering the
•
At the very beginning and end of the tape, no recording
will take place during the 7 seconds, when the leader
tape passes the recorder heads.
•
To protect a tape from accidental erasure, have the tape
in front of you and break out the left tab. Recording on
this side is no longer possible. To record over this side
again, cover the tab hole with a piece of adhesive tape.
Recording from the radio
1. Tune to the desired radio station (see RADIO RECEPTION).
2. Press to open the cassette door.
STOP/EJECT
3. Insert a suitable cassette into the deck and close the cassette door.
4. Press RECORD to start recording.
5. For brief interruptions, press
6. To stop recording, press
Recording from CD
1. Set the FUNCTION switch to CD/MP3.
2. Press to open the cassette door.
STOP/EJECT
3. Insert a suitable cassette into the deck and close the cassette door.
4. Press and
PAUSE RECORD
5. Activate the CD player, and then press the
6. To stop recording, press the
Tape deck maintenance
To ensure quality recording and playback of the tape deck,
clean parts [A], [B] and [C] after approx. 50 hours of
operation or on average once a month. Use a cotton bud
slightly moistened with alcohol or a special cleaning fluid
1. Open the cassette door by pressing
2. Press and clean the rubber pressure roller [C]
PLAY
3. Press and clean the magnetic heads [A] and the
PAUSE
capstan [B]
4. After cleaning, press
door.
NOTE: Cleaning of the heads can also be done by using a special head cleaning cassette.
16
. To resume recording, press
PAUSE
.
STOP/EJECT
buttons together. The recording function is now on stand-by mode.
PAUSE
button first and then press the
PAUSE
STOP/EJECT
and close the cassette
STOP/EJECT
will not affect the recording in progress.
VOLUME
PAUSE
button to start recording.
STOP
.
again.
button on the CD player.