Service And Technical Problems - Magnat SBW 250 Handbuch

Operating elements of the Soundbar
(4) ON/STBY: Switches the device on when it is in the standby mode. Conversely the device can be switched from power operation to
the standby mode.
(5) VOLUME: Increases (+) or decreases (-) the volume.
(6) SOURCE: Selects the input.
Operating elements of the Subwoofer
(15) LED-status indication: This LED illuminates red when the device is in standby mode. The LED lights up green when the subwoofer
is in operating mode. See the „Initial start-up" section..
Operating elements of the Subwoofer
(17) CONNECT: Starts the manual pairing mode on the subwoofer. See the „Initial start-up" section.
Operation with the system remote control (fig. 7):
(18) ON/STBY: Switches the device on when it is in the standby mode. Conversely the device can be switched from power operation to
the standby mode.
(19) HDMI/ARC: Selects the audio input HDMI/ARC:
(20) HDMI 1/2/3: Selects the additional audio / video inputs HDMI 1, 2, 3
(21) BT: Selects the audio input BLUETOOTH:
(22) BT PAIR: Switches the device to the pairing mode when in Bluetooth operation to establish a connection to a Bluetooth source
device.
(23) DIGITAL: Selects the audio input DIGITAL IN:
(24) AUX: Selects the audio input AUX IN:
(25) MUTE: Switches the sound on and off.
(26) VOLUME: Increases (+) or decreases (-) the volume.
(27) NIGHT: Activates or deactivates a playback mode with reduced dynamics and a frequency response that is adapted for sound-
sensitive situations (e.g. late at night).
(28) SURR: Switches the 3D surround sound function on or off.
(29) SOUND: Selects various sound settings:
LINEAR: Linear sound setting
MUSIC: Optimises the frequency response of the unit for music playback.
MOVIE: Optimises the frequency response of the unit for film sound reproduction.
VOCAL: Emphasises the vocal range for particularly good speech intelligibility.
(30) MENU: Opens the settings of the Soundbar
The following settings can be selected and changed with the VOL +/- buttons. (26). Pressing the menu button again will set these
changes:
SUB: Increases (+) / decreases (-) the volume of the subwoofer.
EQ: Sound adjustment for different positioning of the soundbar
WALL: This setting optimises the sound when the soundbar is fitted to the wall.
DESK: This setting optimises the sound when the soundbar is positioned on a shelf in front of or under the TV.
ASTBY: This device switches off automatically after approx. 20 minutes to save energy. This function can be manually disabled. The
factory setting is enabled.
RESET: Sets all settings back to default settings.
EXIT: Exits the setting menu.

SERVICE AND TECHNICAL PROBLEMS

If you should encounter any technical problems, please contact your specialist dealer or Magnat Audio-Produkte GmbH,
Tel.: + 49 (0) 2234807-0.
(side) (Fig. 4b)
(front) (Fig. 6a)
(rear) (Fig. 6b)
14