How To Use Your Dryer; The Controls - Indesit G 84 V Bedienungsanleitung

How to use your dryer

1. Plug in, switch
on electricity.
WARNING: WHEN
SWITCHING ON
OR OFF, PLEASE
ENSURE THAT
YOUR HANDS
ARE DRY
3. Open the door
by pressing and
releasing the front
panel in the position
shown.
5. Load the dryer
placing the
clothes carefully in
the drum pushing
them well towards
the back and
away from the
door seal. Close
the door.
9. When finished
8. Press the START
open the door and
switch to commence
take out the
the drying
laundry. Clean and
programme.
replace the fluff
filter.
By opening the door you can check the dryness of the load as often
Removing Items
as you wish and if you want, remove some items before they are
fully dry. (This is particularly useful for a mixed load where you want
to iron some items, but others are to be fully dried.) You will need
to press the start button after closing the door to re-start the
programme. See section 'The Controls'.
5
2. Sort your laundry
(see section "Sorting
Your Laundry")
4. Always check
FLUFF FILTER
the following:
is clean and in place
6. Press the Power 7. Select the
Switch 'IN'. required programme
or drying time. (see
section "The
Controls")
10. Switch off
WARNING: WHEN
electricity and
SWITCHING ON
remove plug from
OR OFF, PLEASE
socket.
ENSURE THAT
YOUR HANDS
ARE DRY

The Controls

Setting the To set the programme, all you have to do is turn the Programme
Programme Control knob until the required selection appears in line with the
indicator.
Programme Automatic programmes (for load sizes more than 1kg)
Options 1. Dry Cottons
2. Damp Cottons
3. Iron Dry Cottons
4. Dry Synthetics
5. Damp Synthetics
6. Iron Dry Synthetics (
Timed programmes (for load sizes less than 1kg)
7. 40 minutes (
Crease Care phase.
8. 30 minutes (
Crease Care phase.
9. 20 minutes (
Crease Care phase.
10. Airing, 20 minutes of cool tumble.
11. Easy Iron Programme, see section"Easy Iron Programme".
For description of other programmes see next page.
Starting the Dryer Press and release the START button to commence a drying
programme (The drying programme must have been selected first).
The Active Light will then glow.
NOTE: If the door is opened during a programme, the Dryer will
automatically stop. To continue the programme, after closing the
door, the START button must be pressed.
Power Switch Press the button IN to turn the dryer on.
The dryer will not operate unless the power button is IN.
Power Switch Active Light
Start Switch Programme Control
( HIGH heat) This gives driest results.
Some bulky items or large load of towels
may appear slightly damp after this
programme and require a short period of
timed drying.
( HIGH heat)
( HIGH heat)
This gives the wettest results.
( LOW heat)
( LOW heat)
LOW heat)
LOW heat) include cool tumble followed by the
LOW heat) include cool tumble followed by the
LOW heat) include cool tumble followed by the