Getting Started - Noxon iRadio Bedienungsanleitung

Remote Control

3. Getting Started

The packaging box contains the following items:
NOXON iRadio
Remote Control
Power adaptor
User Manual
Get the network ready
For wireless LAN (WLAN) network connection:
Check if WLAN LINK/ACT light of the wired/wireless access point or router is illuminated .
Consult the user guide of that for any questions .
Note: WiFi allows data transfer over short distances within 20 meters without the need of
cabling between the devices . Any walls or ceilings may reduce the strength of the WiFi
connectivity . Therefore try to locate NOXON iRadio and/or the access point within the
distance mentioned above, and avoid any obstacles between two devices .
Connect the power adaptor to the back of NOXON iRadio and plug into power socket .
Switch it on at the back of NOXON iRadio. When it is the fi rst time running the device, the
system will ask you to set Language and Network Confi gurations.
Please search for Software update immediately, after connecting your NOXON iRadio
with the internet . IMPORTANT: Do not remove the power cable of the iRadio during the
software update!
Remember to pull out the clear plastic tab from the battery compart-
ment before using the remote .
To remove the battery from the remote, use your thumb to press the
notched clip towards the center of the battery tray and pull it out .
Replace it with a CR2025 type 3V battery, taking care to insert it
with the positive (+) side up .
You can also control your iRadio via AirMusic Con-
trol App . Just download the App on AppStore or on
Google Play for Andriod systems .
33