Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
In order to remove the protective layer on the heating coil you should operate the machine
approximately three times when it is empty. Please select the maximum level of browning.
Any smoke or smells produced during this procedure are normal. Please ensure suffi cient
ventilation.
1. Only connect the unit to a properly installed and earthed power socket
(230 volts, 50 Hz).
2. To set the browning level, turn the selector clockwise to the preferred level starting from
the lightest - level 1 - to the darkest - level 7. If you are not sure start with a lower setting.
(The mark on the selector switch shows you the setting).
3. Insert the slices of bread in the toasting slot and lower the slide with the lever until it
snaps into place.
4. The appliance starts the toasting. When the set level of browning is reached, the
appliance switches off automatically. The slide pops up automatically.
5. The appliance has a heat-insulated „cool-touch" housing. The metal parts become hot
during use. Leave the toaster to cool before putting it away.
GB
To sue special functions press the relevant key after lowering the lever:
Heating or thawing:
Thawing
( ):
Warming
( ):
STOP
( ):
Integrated
Toasting Attachment:
•
Pull the mains plug out of the mains socket before you clean the unit and allow the unit
to cool down.
•
Only use a slightly damp cloth to clean the outside of the unit.
•
Do not use abrasive or aggressive cleaners.
•
Remove the crumb tray from the slot, remove the crumbs and insert the tray again.
24
05_TA 2702 NEW GR fuer F 24
Before Initial Use
Operation
the relevant LED indicates the function.
to thaw and toast deep-frozen bread.
to warm bread already toasted.
to stop toasting in advance.
for the toasting of bread rolls. Move the key on the right
of the housing downwards in order to fold out the toasting
attachment.
Cleaning
29.03.2006, 9:46:26 Uhr
Werbung
Inhaltsverzeichnis
