Description Of The Appliance - SOLAC AE2510 Gebrauchsanleitung

• Use only the supplied charger.
q
CAUTION!: When you want to dispose of the appliance, NEVER
throw it in the rubbish bin. Take it to your nearest CLEAN POINT or
the waste collection centre closest to your home for processing. In
this way, you will be helping to take care of the environment.

2 DESCRIPTION OF THE APPLIANCE

1 Handle
2 ON/OFF button
3 Main body of appliance
4 Battery cover
5 Battery unit
6 Dust canister
7 Canister removal button
8 Maximum canister fill level
9 Protection filter
10 Filter
11 Multi-purpose brush
12 Multi-purpose brush connection/disconnection button
13 Charger
14 Charge indicator
15 Fastening screw
CHARGING
Important: before using the appliance for the first time, charge the battery
for a minimum of 15 hours to reach full charge.
Do not use chargers not supplied with the appliance.
1 Plug the charger (13) into the mains. The charger may heat up when
used for long periods. This is normal and is not dangerous.
2 Place the broom on the charger. (Fig. 1). Make sure the on/off button (2)
is off. The red pilot light (14) comes on during charging. If the charge
indicator does not come on, make sure the charger is correctly
connected to the mains and the connection cable is in correct condition.
Charging is possible only within a temperature range of 5°C to 40°C.
Important: Always recharge the broom on the charger (13) after each
use. This makes sure the battery is fully charged ready for the next time
it is used. Leaving the battery uncharged for continued periods has a
negative effect on its service life.
DESCRIPTION OF THE APPLIANCE
en
11