Using The Appliance - Philips Specialist fc 8334 01 Bedienungsanleitung

ENGLISH
8
Active Fragrance Control (specific types only)
The scent granules have been specially developed for use in your Philips vacuum cleaner. Only use
the s-fresh` scent granules from Philips in your vacuum cleaner.
If the vacuum cleaner is equipped with Active Fragrance Control, keep it out of the reach of
children. Don't let children play with the appliance. Store the vacuum cleaner in a locked
cupboard if there are small children in the house.
These granules are not edible.
In case of eye contact, flush immediately with plenty of water.
Filling the cartridge
1 Place your thumb and index finger on the sides of the cartridge. Remove the cartridge from
the holder by pressing on the disc (fig. 16).
2 Remove the cap of the cartridge by pulling while applying pressure on the small pressing
points (fig. 17).
3 Open the package at the narrow top end.
4 Fill the cartridge with the contents of one whole package of scent granules.
5 Close the cartridge by putting the cap back onto it ('click').
6 Re-insert the cartridge into the holder ('click'). It only fits into the holder in one way (fig. 18).
Replace the granules when the cartridge no longer emits any fragrance.
Setting the amount of fragrance
1 You can set the amount of fragrance emitted by turning the cartridge forwards (maximum
emission) and backwards (minimum emission) (fig. 19).
2 When you store the vacuum cleaner or don't want any fragrance to be emitted, close the
cartridge by turning it backwards until the openings of the cartridge are no longer visible.

Using the appliance

Adjusting suction power
1 During vacuum cleaning you can adjust the suction power by means of the suction power
control on top of the appliance (fig. 20).
2 Use maximum suction power for vacuum cleaning very dirty carpets and hard floors.
3 Use minimum suction power for vacuum cleaning curtains, table carpets, etc.
Parking the tube
1 By inserting the ridge on the nozzle into the parking slot, you can park the tube in a
convenient position (fig. 21).
Storage
1 You can put the appliance in upright position and attach the nozzle to the appliance by
inserting the ridge on the nozzle into the slot (fig. 22).