Philips FC6095 Bedienungsanleitung Seite 12

English
1
5 Gently turn the inner HEPA filter anticlockwise to remove it from
the filter holder (Fig. 24).
6 Clean the inner HEPA filter and the outer filter with the cleaning
brush supplied (Fig. 5).
Brush the inner HEPA filter from the top downwards along the ribs of
the filter.
If necessary, you can clean the outer filter and the inner HEPA filter
,
in cold or lukewarm water.
The inner HEPA filter and outer filter are not dishwasher-proof.
7 Turn the inner HEPA filter clockwise to attach it to the filter
holder (Fig. 6).
8 Place the outer filter back onto the filter holder and turn it
clockwise to fasten it (Fig. 7).
9 Place the filter unit back into the dust compartment (Fig. 28).
Never put the filter unit back into the dust compartment when the outer
filter and inner filter are still wet.
10 To clean the detachable nozzle, press the nozzle release button to
remove the detachable nozzle from the appliance (Fig. 19).
11 Pull the nozzle insert out of the detachable nozzle.
Both the nozzle insert and the detachable nozzle can be cleaned in
,
warm water with some washing-up liquid or in the dishwasher.
Make sure the nozzle insert and the detachable nozzle are dry before
you reattach them to the appliance.
1 Reattach the dust compartment to the body of the vacuum cleaner
('click').
replacement
Replace the inner HEPA filter if it can no longer be cleaned properly
(usually after it has been cleaned about 50 times).
You can buy new HEPA filters from authorised Philips service centres.
1 Take the filter unit out of the dust compartment (Fig. 22).