i-tec USB 3.0 Gebrauchsanweisung Seite 6

i-tec USB 3.0 Dual Docking Station
with the USB 3.0 interface so that you can utilize the advantages of the fast USB 3.0 equipment. Its
problem free function is ensured by the chipset which needs to have the current drivers available.
Problems that you can encounter during the installation or use of our USB 3.0 equipment are very
often caused by the installed outdated drivers for the USB 3.0 controller or chipset of your notebook /
tablet / PC. Other problems can be caused by outdated firmware of the USB 3.0 port controller. Most
frequently it is one of the following manufacturers: Intel, Renesas (former NEC), Via (VLI), AS Media,
Fresco Logic, Etron.
You can find the most recent drivers for the i-tec products on our website www.i-tec-europe.eu in the
„Download" tab for the individual products. The „Problems with USB 3.0" tab includes a more detailed
description with links to the drivers and firmware for USB 3.0 controllers.
Note:
The installation of audio ports, reader and the USB HUB (for USB 3.0 / 2.0 ports type A) is
ź
automatic from the system, the other ports need to be installed from the supplied CD.
Before the first connection of the docking station to a notebook / tablet / PC it is necessary first to
ź
install the LAN and DVI-I port from the supplied CD and only then to connect the equipment to
the docking station.
INSTALLATION OF DRIVERS IN WINDOWS VISTA / 7 / 8 / 8.1 / 10 (32/64 BIT VERSION)
Before the first use do not connect the docking station to the notebook / tablet / PC, until you install the
corresponding drivers for the LAN and DVI-I port from the supplied CD. The equipment drivers need
to be installed only before the first use.
Insert the CD with the drivers to the CD drive or download the required software from our website
www.i-tec-europe.eu from the „Download" tab for this product. Install the drivers according to the
following procedure:
For the LAN and DVI-I port select the installation from the Setup.exe file in the directory on the CD:/ or
run the downloaded file, select the language of the installation and follow the instructions on the
screen.
Note:
In Windows Vista / 7 / 8 / 8.1 / 10 install the DVI-I port as the „Administrator". The monitor may be
flashing during the installation of the drivers – this is a standard process. After the completion of the
installation we recommend restarting the notebook / tablet / PC.
HARDWARE INSTALLATION (CONNECTING THE DOCKING STATION TO A NOTEBOOK /
TABLET / PC)
1) Turn ON the notebook / tablet / PC and connect the power adapter to the docking station.
2) Connect the power adapter to the AC 110 V / 230 V mains.
3) Connect the USB 3.0 cable to the USB port type B on the back on all of the docking station.
4) Connect the USB 3.0 cable to a free USB 3.0 / 2.0 port of your notebook / tablet / PC.
5) Subsequently, the automatic installation of the ports in the individual systems will start.
EN
05