Configuring Global Authentication Settings; Changing Authentication Settings - Siemens KVM series3-Client Bedienungsanleitung

Configuring Global Authentication settings

Complete one of the following steps:
• Click Apply to save any changes without exiting the AMP.
-or-
• Click OK to save any changes and exit the AMP.
-or-
• Click Cancel to exit the AMP without saving any changes.
5.2.4 Configuring Global Authentication settings
There are two types of user accounts: internal and external. Internal (local) user
accounts reside within the appliance itself, while external user accounts are stored on
an external authentication server. The Users category provides methods for managing
internal user accounts.
The Global - Authentication category specifies the type and order of any
authentication methods used. If a method fails or is unavailable, the software uses the
next enabled authentication method.
Local authentication is always available as the primary or backup authentication
method, and cannot be disabled.
LDAP is supported by the KVM s2-0411, KVM s3-1621, and
KVM s3-1641 appliances.
5.2.4.1

Changing authentication settings

Click the Settings tab in the AMP.
Select the Global - Authentication subcategory.
68
Appliance Management Panel
590-590-609A