Viewing Or Changing General Properties - Siemens KVM series3-Client Bedienungsanleitung

Viewing or changing general properties

3.5.2 Viewing or changing general properties
Select a unit in the Unit list.
Complete one of the following steps:
• Select View - Properties from the Explorer menu.
-or-
• Click the Properties button.
-or-
• Right-click on the unit. Select Properties from the pop-up menu.
The General Properties window opens.
Figure 5: Device General Properties window
In the Name field, type a 1- to 32-character unique name. (This name is local to the
software database; the appliance database might contain a different name for this
unit.)
The Type field is read-only for appliances. For a target device, select a type from
the pull-down menu or enter a 1 to 32 character type in the text field.
In the Icon field, select an icon from the pull-down menu.
22
KVM s3 Client Explorer
590-590-609A