Ports Used By The Software; Technical Support - Siemens KVM series3-Client Bedienungsanleitung

Ports used by the software

6.4 Ports used by the software
Table 11 lists the port numbers that the software uses to communicate with certain
appliances. This information can be used to configure firewalls to let KVM s3 Client
operate in the networks.
Port Appliance
Number
3211 KVM s2-0411
KVM s2-1611
KVM s3-1621
KVM s3-1641
3211 KVM s2-0411
KVM s2-1611
KVM s3-1621
KVM s3-1641
2068 KVM s2-0411
KVM s2-1611
KVM s3-1621
KVM s3-1641
2068 KVM s2-0411
KVM s3-1621
KVM s3-1641
2068 KVM s3-1621
KVM s3-1641
8192 KVM s2-1611
Table 11: Ports Used by the KVM s3 Client
6.5

Technical Support

Our Technical Support staff is ready to assist you with any installation or operating
issues you encounter with your Fujitsu Siemens product. If an issue should develop,
follow the steps below for the fastest possible service: Check the pertinent section of
this manual to see if the issue can be resolved by following the procedures outlined.
Check our web site at http://www.fujitsu-siemens.com/support/ and click on Services &
Support . Click helpdesk on the left side of the page for a listing of technical support
phone numbers in your area.
104
Type Purpose
TCP Proprietary management protocol
UDP Proprietary install and discovery
protocol
TCP Encrypted keyboard and mouse
data
TCP Digitized video data
TCP Virtual media
TCP Digitized video data
Appendixes
590-590-609A