Accessing A Target Device - Siemens KVM series3-Client Bedienungsanleitung

Accessing a target device

3.4.1 Accessing a target device
Click the Devices tab in the Explorer.
Figure 4: Devices in the Explorer
Complete one of the following steps:
• Double-click on a target device in the Unit list.
-or-
• Select a target device, and then click Connect Video or Browse if an URL is
configured. Only the applicable button or buttons for the selected target device
are visible.
-or-
• Right-click on the target device. Select the connection entry from the pop-up
menu and then click Connect Video or Browse if an URL is configured. Only
the applicable entry for the selected target device is visible.
-or-
• Select a target device in the Unit list and press Enter.
20
KVM s3 Client Explorer
590-590-609A