During Installation - Siemens KVM series3-Client Bedienungsanleitung

Installation and startup
where device_file is the system-dependent device file associated with the CD
and mount_point is the directory that will be used to access the contents of the
CD after it is mounted. Typical default values include "/mnt/cdrom" and "/
media/cdrom".
See the Linux operating system documentation for the specific mount
command syntax to use.
Open a command window and navigate to the CD mount point. For example:
cd /mnt/cdrom
Enter the following command to start the install program:
sh ./linux/setup.bin
Follow the on-screen instructions.
2.2.3

During installation

You are prompted to select the destination location where the application will be
installed. You can select an existing path or type a directory path. The default path for
Windows 2000, NT, and XP systems is the program files directory. The default path for
Linux systems is the usr/lib directory.
If you enter a path that does not exist, the installation program automatically creates it
during installation.
You can also indicate if you want a KVM s3 Client icon installed on the desktop
(Windows and Linux only).
590-590-609A
During installation
9