Rebooting The Appliance; Managing The Appliance Configuration Database; Saving An Appliance Configuration Database - Siemens KVM series3-Client Bedienungsanleitung

Rebooting the appliance

5.12 Rebooting the appliance
The Reboot Appliance tool instructs the appliance to reboot. The appliance broadcasts
a disconnect message to all client connections before rebooting.
Click the Tools tab in the AMP.
Click the Reboot Appliance button. A message prompts you to confirm the reboot.
Click Yes to confirm the request. The appliance notifies each attached KVM s3
Client and then reboots.
The AMP closes.
5.13 Managing the appliance configuration
database
All appliance settings are stored in an appliance configuration database. (User account
information is stored in a user database; see "Managing the appliance user database"
on page 97 for more information.)
5.13.1

Saving an appliance configuration database

The Save Appliance Configuration tool saves the configuration database from the
appliance to a file on the computer running the software.
The file is encrypted during the save process, and you are prompted to create a
password when you save the database. You must enter this password when you restore
the file.
Click the Tools tab in tthe AMP.
Figure 34: AMP tools tab
96
Appliance Management Panel
590-590-609A