Maintenance - Domo DO 7241 Gebrauchsanleitung

DO-7241S

MAINTENANCE

Removing dust from the dust cup.
Always operate the vacuum cleaner with the dust cup installed.
Make sure to place the fi lter and Hepa-fi lter in the correct position.
1. Remove the fl exible tube, press the lock/release button and remove the dust cup.
2. Remove the dust cup cap and empty the dust cup.
3. Replace the dust cup cap and replace the dust cup until it is locked.
Cleaning and changing of the fi lters.
Never use the vacuum cleaner without fi lters.
Disconnect from electrical outlet before removing the fi lters.
Do not use a washing machine to rinse the fi lters.
Do not use a hair dryer to dry the fi lters.
a) Cleaning and changing fi lter and HEPA for air-inlet.
• After opening the dust cup, rotate the Hepa-fi lter until it is unlocked.
• Remove the Hepa-fi lter.
• Rinse fi lter and Hepa-fi lter in lukewarm water and dry fi lter and Hepa completely.
• Put the fi lter into the Grille-Filter, attach the Hepa-fi lter and the Grille-Filter onto the
dust cup lid.
Replace the Hepa-fi lter when necessary. Replace the Hepa-fi lter when necessary.
b) Changing fi lter for air-outlet.
• Open the grille for air-outlet.
• Replace the fi lter and close the grille for air-outlet.
16