Assembling The Vacuum Cleaner - Domo DO 7241 Gebrauchsanleitung

DO-7241S
PARTS
3
2
1. Floor brush
8
4
9
2. Tubes
3. Flexible hose
6
4. On/off switch
5. Button lock/release dust cup
5
6. Dust cup
7. Turbo brush
1
8. Hepa fi lter
7
9. Full dust container indicator

ASSEMBLING THE VACUUM CLEANER

1. Fitting or removing the fl exible hose
Insert the fl exible hose into the air inlet on the front of the appliance. Press until it
clicks into position.
Removing the fl exible hose: remove the plug from the power socket and push on the
release button to remove the fl exible hose from the air inlet.
2. Attach the telescopic tubes to the handle.
3. Attach the fl oor brush to the telescopic tubes.
ACCESSORIES
a) Crevicle tool: for radiators, crevices, corners, baseboards and between cushions.
b) Dusting brush: used for furniture, blinds, books, lamp shades and shelves.
c) Small brush: used to clean the sofa.
INSTRUCTIONS FOR USE
1. Before using the appliance, unwind a suffi cient length of cable and insert the plug
into the power socket. A yellow mark on the power cable shows the ideal cable length.
Don't pull the cable beyond the red mark.
2. Press the 'on/off ' button to switch the appliance on.
3. To rewind the power cable, press the rewind button with one hand and guide the
cable with the other hand to ensure that it does not whip causing damage.
15