Cleaning And Maintenance - Domo DO1032SV Gebrauchsanleitung

CLEANING AND MAINTENANCE

CLEANING THE MACHINE
Clean the machine with a slightly moist soft cloth. Dry the machine off well. Never submerge the machine
in water!
CLEANING THE DUST RESERVOIR
1. Press the dust reservoir unlock button to remove it from the vacuum cleaner.
2. Then take the filters out of the dust reservoir. Empty the
3. Take part A from part B. You can remove the lowest section of part B for more precise cleaning.
4. The dust reservoir, part A and part B can be cleaned under running water. Do take care to dry them
completely before using them again in the
We advise replacing the filters regularly to ensure an optimal operation of the machine. Dirty filters
will reduce the suction power drastically. After every cleaning, clean the dust reservoir and the filters to
extend the life span of your machine.
CLEANING THE FLOOR BRUSH
1. Remove the floor nozzle from the upright vacuum cleaner. Press the
the floor nozzle and remove it from the machine.
2. Slide the cover on the right side of the floor brush to the right.
3. Remove the
4. Remove hairs and other dirt that have wrapped around the floor brush. If you do not clean the floor
brush regularly, it will become damaged and your machine will become unusable.
5. The rotating floor brush may be rinsed off under running water. Make sure that it is completely
before using it.
6. Place the floor brush back into the floor nozzle when it is clean.
7. Slide the cover closed again to secure the floor brush.
8. Push the nozzle back onto the stick. The machine is now again ready for use.
28
DO1032SV
1 2
rotating floor brush from the floor nozzle.
dust reservoir.
machine.
3
A
B
release button at the back of
dry