Set The Timer; Set The Humidity Level - Philips HU4803 Benutzerhandbuch

Note
•
Sleep mode only works at speed
•
In sleep mode, the red indicator does not blink, but
remains on when the water level gets low.
•
In sleep mode, you can only set the timer; the humidity
level cannot be set, and the humidity light is off.

Set the timer

With the timer function, you can let the
humidifier operate for a set number of hours.
When the set time has elapsed, the humidifier
automatically switches off.
1
Press the TIMER button to activate the
timer.
» The TIMER light (1H, 4H or 8H) goes on.
2
Press the TIMER button repeatedly to
choose the number of hours you want the
humidifier to operate. The corresponding
TIMER light goes on.
To deactivate the timer function, press the
TIMER button repeatedly until the TIMER light
(1H, 4H or 8H) is off.
EN
12
.

Set the humidity level

Note
•
Make sure that the water tank is filled with water
before the humidifier can function (see the chapter
'Get started', section 'Prepare for humidification').
• Press the HUMI button once or more
times to set the desired air humidity to 40,
50, 60 percent or no preset level.
» The humidity light (40, 50 or 60) of the
set humidity level turns on.
» For HU4802, The humidity indicator
light is in red if the desired humidity
level is not reached. It turns blue when
the desired humidity level is reached.
For HU4803, the actual humidity level is
displayed on the center of the control
panel.
Tip
•
A comfortable humidity level is from 40RH% to 60RH%.
You can choose the preferred humidity level at 40%RH,
50%RH or 60%RH..
Note
•
If no preset humidity level is selected, the humidifier will
stop working when the humidity level reaches 70RH%
in non-auto modes and 50RH% in auto mode; for
HU4802, the humidity indication light will be off.