Slow Sync Flash Mode - Nikon Nuvis 200 Bedienungsanleitung

ally regardless of the available light.
2
Compose the picture and
shoot.
Lightly press the shutter
▼
release button.
▼ Make sure the red LED lights up,
then depress the shutter release
button all the way to take the picture.
•If the red LED blinks when the shutter release
button is pressed lightly, lightly press the
shutter release button again and wait for the red
LED to light up before reshooting.

Slow sync flash mode

Use this mode to obtain the correct exposure for both the main subject
and background in low-light situations or at night.
1
J
Press the button until
†
" "appears on the LCD
panel.
•Since slow shutter speeds are usually
selected in this mode, use a tripod to
prevent camera shake.
•When the subject is bright, "
appears on the LCD panel and the flash
does not fire.
MOD
SEL
ADJUS
2
Compose the picture
and shoot.
▼ Lightly press the shutter
release button.
▼ Make sure the red LED lights up,
then depress the shutter release
button all the way to take the picture.
#
"
•If the red LED blinks when the shutter release
button is pressed lightly, lightly press the
shutter release button again and wait for the red
LED to light up before reshooting.
E
23