Grundig STR 110 microSAT Bedienungsanleitung Seite 9

Switching voltage on TV socket
Modus : single
This option determines whether and when a swit-
ching voltage is available at the TV EURO AV
socket. You have the choice between the following
options:
single Basic setting. When the receiver is switched
on, a switching voltage is available at the TV
socket. Many TV sets then switch automati-
cally in the AV mode and show the picture
from the SAT receiver on the picture scre-
en.
twin This option must be selected if you wish to
connect the STR 110 micro SAT as second
receiver to an existing SAT system (see
pages 21 to 23).
1 To change the setting, press the key when
.
MENUE
in the "LNB LO" line of the main menu.
LNB LO 1 : 09750 pos
LNB LO 2 : 09750 pos
LNB LO 3 : 10000 pos
LNB LO 4 : 11475 pos
LNB Power : 14/18 Volt
Modus : single
Volume : 26
STORE = OK EXIT = TXT
In the "Modus ..." menu line, you can change the
2
setting using the x c keys.
Volume
Volume : 26
This function is used to adjust the volume of the
SAT programmes to the volume of the terrestrial
programmes.
1 To change the setting, press the . key when
MENUE
in the "LNB LO" line of the main menu. The menu
line shown above is displayed and you can change
the setting using the keys.
x c
Values below 10 are not saved.
LNB LO 1 : 09750 pos
LNB LO 2 : 09750 pos
LNB LO 3 : 10000 pos
LNB LO 4 : 11475 pos
LNB Power : 14/18 Volt
Modus : single
Volume : 26
STORE = OK EXIT = TXT
Decoder settings
Decoder : Auto
1 Use the x c keys to select the desired setting in
the main menu.
The following decoder settings are possible:
Auto Select this option for decoders which sup-
ply a switching voltage (e.g. Première);
the decoder then is automatically
switched into the signal path.
On Select this option for decoders without
switching voltage generation.
2 Press the key to display the decoder
.
MENUE
settings menu.
Decoder
Norm : FBAS
Mode : Auto
Signal : Audio + Video
STORE = OK EXIT = TXT
3 In the "Norm" menu line, you can switch the video
signal for the decoder between FBAS, Baseband,
PAL (deemphasis) and linear Baseband. Certain
decoders require these signal settings for correct
operation.
4 In the "Mode" menu line, you can switch between
"Auto" and "On" (like in the main menu).
5 In the "Signal" menu line, you can select whether
only the video signal or the video and the audio
signal is to be decoded.
Main menu
.
MENUE
.
MENUE
Programm : 1 TV
.
MENUE
Name : ARD_ _
Frequenz : 11494.0 MHZ
LNB LO : LO1 (9.750)
Pol./Ant : H / 0 kHz A .
MENUE
Kontrast : 3 (37)
Decoder : Auto
Audio : 1 (7.02 ST)
.
MENUE
.
MENUE
Timer menu
h
Timer 1 : off
Timer 2 : off
.
MENUE
Timer 3 : off
Timer 4 : off
Date : 24.12.96
Time : 18:46
Menu for picture and sound improvement (Threshold/DX)
®
DX
Threshold : off
Audio BW : 110 kHz
P 199 Radio :
P 1 TV : ARD
P 2 TV : ZDF
P 3 TV : RTL
P 4 TV : SAT 1
P 5 TV : N-TV
P 6 TV : 3SAT
P 7 TV : PRO 7
LO 1 : 09750 pos
LO 2 : 09750 pos
LO 3 : 100000 pos
LO 4 : 11475 pos
LNB Power : 14/18 Volt
Modus : single
Volume : 26
Kontrast 1 : 16
Kontrast 2 : 19
Kontrast 3 : 36
Kontrast 4 : 16
Decoder
Norm : FBAS
Mode : Auto
Signal : Audio + Video
Audio : 1
Audio L : 7,02 MHz
Audio R : 7,20 MHz
Mode : Stereo
Deem : Panda
Audio BW : 110 kHz
Timer 1 : on
Programm : 125 N-TV
Date : 24.12.96
Start : 21:00
Stop : 22:15