AEG L 87495 XFL Benutzerinformation Seite 28

28 www.aeg.com
WARNING!
Remove all the packaging and
the transit bolts before you install
the appliance.
9. Remove the power supply cable and
the drain hose from the hose hold-
ers.
10. Remove the three bolts. Use the key
supplied with the appliance.
11. Pull out the plastic spacers.
12. Put the plastic caps in the holes.
You can find these caps in the user
manual bag.
We recommend that you keep
the packaging and the transit
bolts for when you move the ap-
pliance.