Before First Use; Using The Appliance; Loading The Laundry - AEG L 87495 XFL Benutzerinformation

14 www.aeg.com
Programmes
Standard 60
°C cotton
Standard 40
°C cotton
1) At the end of spin phase.
L 87495 XFL

8. BEFORE FIRST USE

1.
To activate the drain system, put 2 li-
tre of water in the main wash com-
partment of the detergent dispens-
er.
2. Put a small quantity of detergent in
the main wash compartment of the

9. USING THE APPLIANCE

1. Open the water tap.
2. Connect the mains plug to the mains
socket.
3.
Press button
pliance.

10. LOADING THE LAUNDRY

1. Open the appliance door.
2. Put the laundry in the drum, one
item at a time. Shake the items be-
fore you put them in the appliance.
Load Energy con-
(Kg) sumption
(kWh)
4.5
4.5
Model
to activate the ap-
1
Water con-
sumption (li-
tre)
0.58 40
0.46 40
Off Mode (W)
0.05
detergent dispenser. Set and start a
programme for cotton at the highest
temperature without laundry. This
removes all possible dirt from the
drum and the tub.
4. Put the laundry in the appliance.
5. Use the correct quantity of deter-
gent and additives.
6. Set and start the correct programme
for the type of laundry and soil.
Make sure not to put too much laun-
dry in the drum.
3. Close the door.
Approxi- Remaining
mate pro- moisture
gramme
(%)
duration
(minutes)
198 44
178 44
Left On Mode (W)
0.05
1)