Endress+Hauser Ecograph T RSG30 Bedienungsanleitung Seite 37

Multi Channel Recorder
!
Note!
• Every parameter is modified via a dialog box.
• The altered settings only take effect once you return to normal operation by pressing
several times (confirm you accept changes with
the previous data.
Procedure for unit configuration/set up:
!
Note!
To delete the temporary set up files you should delete the CompactFlash CF card and the internal
memory after the commissioning (unit set up).
F
Delete CF:
Delete internal memory:
memory
Basic settings (language, date/time, save cycle, CompactFlash, etc.)
Signal settings for the analog inputs (signal type, input range, etc.)
Signal settings for the digital inputs (function, designation, etc.)
Signal settings of the set points and alarm relays (if necessary)
Signal settings for the relays (operating mode, description, etc.)
Communication settings (USB/RS232/RS485/Ethernet)
Main menu -> CompactFlash (CF) functions -> Delete CF
F
Main menu -> Diagnostic/unit information -> Delete internal
F
). Until this time, the unit still works with
Start







End
Commissioning and operation
Z
37