Adjusting The Image - InFocus LitePro 700 Series Installationshandbuch

I n v e r t i n g t h e I m a g e

ADJUSTING THE IMAGE

10
4 Replace the bulb or clean the air filter as
described in your LitePro User's Guide if
needed.
5 Realign the quick release bolts in the keyhole
slots on the mounting plate.
6 Fasten the knurled knob.
Inverting the Image
1 Press the menu button on the remote or key-
pad to display the projector 's on-screen
menu.
2 Using the disk mouse, move the cursor to the
Controls tab to display the Controls menu.
3 Slide the cursor to the Ceiling Mount box.
4 Click either of the two buttons below the disk
mouse to invert the image.
Replacing the Lamp Module
Remove the projector from the ceiling base box
to replace the lamp. Refer to the LitePro User's
Guide for lamp removal instructions.