LG B2100 Benutzerhandbuch Seite 151

Settings [Menu 4]
Phone lock [Menu 4-4-2]
When the Phone lock feature is enabled, the phone is
locked and you must enter the phone password each time
the phone is switched on.
The password is factory set to 0000. To change the phone
password, refer to the Change codes–Security code
menu option (Menu-4-4-6-3). Once the correct password
has been entered, you can use the phone until you switch
it off.
The following options are available:
• On
You are required to enter the phone password when
you switch the phone on.
• Off
The phone connects directly to the network when
you switch it on.
• Automatic
Your phone will request security code only when you
change your SIM card.
Automatic key lock [Menu 4-4-3]
When you enable Automatic key lock, keypad will be
locked automatically on an idle screen after 10
seconds without any key requesting.
Note
• If you want to lock your phone keypad manually,
press
• To unlock your phone keypad, press
key and then press
enable Automatic key lock, your phone keypad will
lock again automatically after 10 seconds.
Call barring (Network dependent) [Menu 4-4-4]
Call barring lets you restrict the making and receiving
of calls with your phone. For this function, you need
the Network password, which you can obtain from
your service provider.
The following options are available:
• All outgoing
No call can be made.
• Outgoing international
International calls cannot be made.
• Outgoing international except home country
When abroad, calls can be made only to numbers
50
B2100 User Guide
then .
key. If you
[unlock]