Unpacking The Appliance; Overview Of The Appliance; Installation - BOMANN DU 667 G Bedienungsanleitung

• Do not try to repair the appliance on your own. Always contact an authorized Do not try to repair the appliance on your own. Always contact an authorized Do not try to repair the appliance on your own. Always contact an authorized
technician. To avoid the exposure to danger, always have faulty cable be replaced
only by the manufacturer, by our customer service or by qualified person and with only by the manufacturer, by our customer service or by qualified person and with only by the manufacturer, by our customer service or by qualified person and with
a cable of the same type.
1. Remove the appliance from its packaging. Remove the appliance from its packaging.
2. Remove all packaging material, such as foils, filler, cable holder and cardboard packaging. packaging material, such as foils, filler, cable holder and cardboard packaging. packaging material, such as foils, filler, cable holder and cardboard packaging.
3. To prevent hazards, check the appliance for any transport damage. To prevent hazards, check the appliance for any transport damage.
4. In case of damage, do not put the In case of damage, do not put the appliance into operation. Contact your distributor.
NOTE: : : : NOTE
NOTE NOTE
Production residue or dust may have collected on the appliance. We recommend cleaning the appliance a sidue or dust may have collected on the appliance. We recommend cleaning the appliance a sidue or dust may have collected on the appliance. We recommend cleaning the appliance ac-
cording to chapter "Cleaning and Maintenance
NOTE NOTE: : : : The original appliance may differ from the appliance pictured here. original appliance may differ from the appliance pictured here.
NOTE NOTE
Supplied parts Supplied parts Supplied parts Supplied parts
1 x glass capture panel
2 x non-return valve
Assembly material incl. drill template Assembly material incl. drill template
There must be a safety distance between the hotplate of the There must be a safety distance between the hotplate of the cooking pot on the hob and the
extractor hood:
The distance must be between 45 – – – – The distance must be between 45
The distance must be between 45 The distance must be between 45
installation instructions for the gas cooker spe installation instructions for the gas cooker specify a greater distance, this distance must be taken into consi
eration.
id the exposure to danger, always have faulty cable be replaced id the exposure to danger, always have faulty cable be replaced

Unpacking the Appliance

Unpacking the Appliance Unpacking the Appliance Unpacking the Appliance
into operation. Contact your distributor.
and Maintenance".

Overview of the Appliance

Overview of the Appliance
Overview of the Appliance Overview of the Appliance
1 x outer (lower) duct without ventilation slots 1 x outer (lower) duct without ventilation slots
1 x inner (upper) duct with ventilation
– – – – 55 55 cm cm. For gas appliances, the distance must be at least 65 cm. . For gas appliances, the distance must be at least 65 cm. If the . For gas appliances, the distance must be at least 65 cm. . For gas appliances, the distance must be at least 65 cm.
55 55 cm cm . For gas appliances, the distance must be at least 65 cm. . For gas appliances, the distance must be at least 65 cm. . For gas appliances, the distance must be at least 65 cm. . For gas appliances, the distance must be at least 65 cm.
ify a greater distance, this distance must be taken into consid-
1 Telescopic duct, 2-part
2 Control panel
3 Lighting
4 Glass capture panel
5 Aluminum grease filter cover

Installation

Installation
Installation Installation
ing pot on the hob and the bottom part of the
18
cover
slots