Axis 5600+ Benutzerhandbuch Seite 101

AXIS 5600+ Benutzerhandbuch
Redirecting Print Jobs
when a printer is busy
Beispiel:
Hinweise:
Zurücklesen der
Informationen
If print data is received for a printer that is already busy, the host must
wait. However, it is possible to use a logical printer to redirect the
print data to another logical printer when the target printer is busy. If
the second printer is also busy, the host must wait until the target
printer is ready.
Follow the instructions below to redirect PR1 print jobs to PR3, when
the printer assigned to PR1 is busy:
1. Select the Printer1 Web page.
2. Set the Physical Port parameter to LPT1.
3. Set the Secondary Printer parameter to PR3.
4. Set the Wait On Busy parameter to NO.
5. Click the Submit Printer1 settings button.
6. Select the Printer3 Web page.
7. Set the Physical Port parameter to LPT2.
8. Click the Submit Printer3 settings button.
Logical Printer redirection cannot be nested. If PR3 is redirected
to another logical printer, the print job will not be redirected if
PR3 is busy.
If both printers are busy, the print job will be printed on the
printer that first finishes its active print job.
Der AXIS 5600+ unterstützt den Bidirektionaldruck. Die
Informationen vom Drucker werden über den parallelen Anschluß
zurückgelesen, wenn für den Parameter Read-Back-Anschluß
(PRx_IN) der Standardwert AUTO eingestellt ist. Dies ist jedoch nur
möglich, wenn auch der Drucker den Bidirektionaldruck unterstützt.
Abschnitt 8: Installation unter UNIX
101